We are dedicated to collecting, sorting, and recycling plastics, transforming waste into high-quality granules for HDPE, PP, and LDPE. We produce regenerated polymers suitable for extrusion, blow molding, and injection molding processes, guaranteeing consistent performance and certified standards. Our approach is based on rigorous quality control systems and environmental certifications, which demonstrate product reliability. Thanks to our technical expertise and sustainability, we offer regenerated plastic solutions that meet the most demanding production needs.
rMIX: Production of Post-Consumer Recycled LDPE Granules for Film Extrusion - 11651We produce grey/greenish regenerated LDPE granules for flexible films with high mechanical performance Code: 11651. We produce recycled LDPE in granules from post-consumer streams, grey/greenish in colour, without additives, intended for extrusion processes. This material is particularly suitable for the production of flexible, resistant and functional LDPE films, combining sustainability and technical performance. Typical properties include a density of 0.94–0.95 g/cm³ (ISO 1183), a melt flow rate at 230°C of 0.50–0.70 g/10 min at a 2.16 kg load and 2.10–3.0 g/10 min at a 5.00 kg load (ISO 1133). It has an ash content of less than 4% (ISO 3451), a tensile strength of 23 MPa, and an elongation at break of 325% (ISO 527-3), providing high strength and ductility. The bulk density is 0.52 g/ml (ISO 60), with a polyethylene purity of 99% (ISO 11357), and a melting temperature of 108–124°C. Filtration ranges from 90 to 110 microns, ensuring quality and consistency throughout the transformation process. This recycled LDPE is a reliable and sustainable choice for those seeking high-performance, environmentally friendly materials for film production. Origin: Bulgaria Category: Recycled polymers - LDPE - granules - post-consumer - film If you are a subscriber to rMIX, contact the company. If you are not, subscribe by choosing the contract you prefer
SEE MORE
rMIX: Production of Natural Recycled LDPE in Granules for Extrusion and FilmWe produce post-industrial and post-consumer natural LDPE granules for high-performance sustainable films Code: 11650. We produce recycled LDPE in natural color granules, obtained from post-industrial and post-consumer streams, without additives, specifically formulated for extrusion and film applications. This material is ideal for the production of flexible and resistant films, used in numerous industrial and commercial sectors. Its typical properties include a density of 0.93–0.95 g/cm³ (ISO 1183), a melt flow rate at 230°C of 0.80–2.0 g/10 min at a load of 2.16 kg and 3.0–8.0 g/10 min at a load of 5.00 kg (ISO 1133). It also has an ash content of less than 1% (ISO 3451), a tensile strength of 23 MPa, and an elongation at break of 325% (ISO 527-3), values that ensure excellent mechanical strength and ductility. The bulk density is 0.52 g/ml (ISO 60), and the polyethylene purity reaches 99% (ISO 11357), with a melting temperature of 108–124°C. These characteristics make our recycled LDPE a reliable, sustainable and competitive solution for the production of high-performance films, while reducing environmental impact. Origin: Bulgaria Category: Recycled polymers - LDPE - granules - extrusion - film If you are a subscriber to rMIX, contact the company. If you are not, subscribe by choosing the contract you prefer
SEE MORE
rMIX: Production of White Recycled Copolymer Polypropylene Granules for Injection MoldingWe produce regenerated white copolymer PP granules for injection molding of household items, furniture, containers and industrial applications Code: 11649. We produce recycled polypropylene copolymer granules in off-white color, without additives, designed for general injection molding applications. The material is versatile and finds use in numerous sectors: housewares, furniture, crates, containers, buckets, composters, pallets and shovels, offering a balance between strength and ease of workability. Typical properties include a density of 0.89 to 0.92 g/cm³ (ISO 1183), a melt flow rate at 190 °C of 25–35 g/10 min (ISO 1133), a Charpy notched impact strength at 23 °C of 8–9 kJ/m² (ISO 179) and an ash content of less than 1.5% (ISO 3451). This combination of characteristics ensures high processability, good impact resistance, and optimal performance in industrial production processes. Our recycled PP copolymer represents a reliable and sustainable solution, capable of reducing environmental impact while maintaining high quality and performance. Origin: Bulgaria Category: Recycled polymers - PP - copolymer - pellets - injection molding If you are a subscriber to rMIX, contact the company. If you are not, subscribe by choosing the contract you prefer
SEE MORE
rMIX: Production of Black Recycled Polypropylene Copolymer Granules for Injection MFI 7-10We produce black recycled copolymer PP granules for the molding of automotive components and battery containers Code: 11648. We produce recycled polypropylene copolymer in black granules, with the addition of a masterbatch, specifically developed for injection molding. The material finds application in high-performance sectors such as automotive and battery case manufacturing, where mechanical strength and durability are essential. Typical properties include a density between 0.90 and 0.94 g/cm³ (ISO 1183), a melt flow rate at 190 °C of 7–10 g/10 min (ISO 1133), and an ash content of less than 1.5% (ISO 3451). Mechanically, it offers a yield strength of 24–26 MPa, a yield elongation of 10% (ISO 527), a flexural modulus of 1100–1300 MPa (ISO 178), and a Charpy notched impact strength at 23 °C of 8–10 kJ/m² (ISO 179/1eA). Thermal performance includes excellent resistance to thermal aging for over 400 hours at 150°C, ensuring product stability and durability. This combination of properties makes our recycled PP copolymer a reliable, sustainable, and competitive solution for demanding industrial production. Origin: Bulgaria Category: Recycled polymers - PP - granules - copolymer - injection molding If you are a subscriber to rMIX, contact the company. If you are not, subscribe by choosing the contract you prefer
SEE MORE
rMIX: Production of Natural Recycled Polypropylene Granules for Injection Molding - 11647We produce a recycled natural PP granule for general injection applications Code: 11647. We produce recycled polypropylene in natural granules, intended for injection molding applications for general purpose components. The material offers a balance between processability, lightness, and strength, making it suitable for a wide range of technical and industrial products. Typical properties include a density of 0.90 to 0.91 g/cm³ (ISO 1183), a melt flow rate at 190°C of 10–15 g/10 min at a load of 2.16 kg (ISO 1133) and an ash content of less than 0.5% (ISO 3451). These values ensure high processability in production processes and excellent quality of molded products. Thanks to careful control of physical and mechanical properties, we offer a competitive, sustainable, and reliable recycled polypropylene, capable of reducing production costs while contributing to a more environmentally responsible industrial model. Origin: Bulgaria Category: Recycled polymers - PP - injection - granules If you are a subscriber to rMIX, contact the company. If you are not, subscribe by choosing the contract you prefer
SEE MORE
rMIX: Production of White Recycled HDPE Granules for Extrusion and BlowingWe produce white regenerated HDPE granules for blowing bottles, containers and industrial packaging Code: 11646. We produce recycled HDPE in white granules, free from additives, designed for blow molding and extrusion applications. The material is ideal for the production of bottles for the cosmetics, chemical and detergent sectors, as well as resistant cans and containers. Typical properties include a density of 0.95 to 0.97 g/cm³ (ISO 1183), a melt flow rate at 190°C of 0.25–0.60 g/10 min at a 2.16 kg load and 1.00–2.00 g/10 min at a 5.00 kg load (ISO 1133). It has an Izod impact strength at 23°C of 8–9 kJ/m² (ISO 180) and an ash content of less than 0.5% (ISO 3451). These characteristics ensure a balance between processability, strength, and dimensional stability, making our products reliable and high-performance. Our commitment translates into high-quality recycled HDPE, capable of reducing environmental impact while offering a competitive and safe material for numerous industrial applications. Origin: Bulgaria Category: Recycled polymers - HDPE - granules - blow molding - extrusion If you are a subscriber to rMIX, contact the company. If you are not, subscribe by choosing the contract you prefer
SEE MORE
rMIX: Production of Natural Recycled HDPE Granules for Extrusion and Blow Molding of BottlesWe produce recycled HDPE granules for the blow molding of bottles, containers and industrial packaging Code: 11645. We produce recycled HDPE in natural-colored granules, free from additives, specifically designed for extrusion and blow-molding applications. This material is ideal for making bottles for cosmetics, chemicals, detergents, as well as cans and containers for various industrial sectors. Typical properties include a density of 0.95–0.96 g/cm³ (ISO 1183), a melt flow rate at 190°C of 0.20–0.50 g/10 min at a 2.16 kg load and 0.80–1.80 g/10 min at a 5.00 kg load (ISO 1133). The material also offers high Izod impact strength at 23°C of 12–13 kJ/m² (ISO 180) and an ash content of less than 0.5% (ISO 3451). These characteristics ensure an optimal combination of strength, dimensional stability, and processability, making the final products durable and safe. Thanks to careful quality control and sustainable raw material management, we offer a recycled HDPE capable of combining production efficiency with reduced environmental impact. Origin: Bulgaria Category: Recycled polymers - HDPE - granules - bottle blow molding If you are a subscriber to rMIX, contact the company. If you are not, subscribe by choosing the contract you prefer
SEE MORE
rMIX: Production of Recycled HDPE Granules for Injection MoldingWe produce regenerated black HDPE granules for injection molding Code: 11644. We specialize in the production of recycled HDPE granules, obtained from regeneration processes that guarantee consistent quality and uniformity. We supply black granules with masterbatch additives, specifically developed for injection molding applications. The material is widely used in the production of pallets, crates, and building accessories, ensuring high resistance and workability. Typical properties include a density of 0.94 to 0.96 g/cm³ (ISO 1183), a melt flow rate at 190 °C of 2–4 g/10 min at a load of 2.16 kg (ISO 1133) and an ash content of less than 0.5% (ISO 3451). These parameters make the product ideal for obtaining robust artefacts, with a uniform surface finish and excellent dimensional stability. We combine sustainability and innovation, transforming post-consumer plastics into high-performance regenerated solutions, reducing production costs and environmental impact. Thanks to careful monitoring and dedicated technical consultancy, we guarantee our customers a reliable and competitive material for their industrial needs. Origin: Bulgaria Category: Recycled polymers - HDPE - granules - injection molding If you are a subscriber to rMIX, contact the company. If you are not, subscribe by choosing the contract you prefer
SEE MORE
rMIX: Production and Supply of Recycled HDPE Granules for Blow Molding and ExtrusionWe produce regenerated HDPE granules for extrusion and blowing of pipes, sheets, membranes and profiles Code: 11643. We produce recycled HDPE, transformed into regenerated granules in grey, black or blue, with masterbatch additives that improve its technical performance. Our HDPE granules are designed for extrusion and blow molding applications, finding use in a wide range of products such as pipes, sheets, membranes and profiles. Physical characteristics include a density of 0.92 to 0.95 g/cm³ (ISO 1183), a melt flow rate at 190°C of 0.30–0.60 g/10 min at a load of 2.16 kg and 1.50–2.50 g/10 min at a load of 5.00 kg (ISO 1133), and an ash content of less than 1.5% (ISO 3451). These values guarantee dimensional stability, mechanical resistance and ease of processing in the main production processes. Our strength lies in our ability to combine consistent quality, sustainability, and flexibility, offering a regenerated HDPE capable of reducing environmental impact without compromising performance. With rigorous monitoring of every stage and dedicated technical consultancy, we are the ideal partner for companies seeking reliable and competitive materials. Origin: Bulgaria Category: Recycled polymers - HDPE - granules - post-consumer If you are a subscriber to rMIX, contact the company. If you are not, subscribe by choosing the contract you prefer
SEE MORE
rMIX: Production of High-Performance Recycled HDPE by ExtrusionWe produce regenerated granules with additives for the extrusion of pipes, sheets, membranes and profiles Code: 11642. We are dedicated to the production of recycled HDPE granules, transforming post-consumer plastics into high-quality regenerated granules. Our polymers are supplied in granular form, with masterbatch additives that improve their performance and make them ideal for extrusion processes. The HDPE we offer is used in the production of pipes, sheets, membranes and profiles, guaranteeing reliability and consistency in the results . Typical properties include a density of 0.92 to 0.95 g/cm³ according to ISO 1183, a melt flow rate at 190 °C of 0.15–0.30 g/10 min at a load of 2.16 kg and 0.30–0.80 g/10 min at a load of 5.00 kg (ISO 1133), and an ash content of less than 0.5% (ISO 3451). These values ensure dimensional stability, good processability, and resistance in the most demanding industrial applications. Our unique feature is offering a regenerated HDPE that combines technical performance and sustainability, reducing production costs and environmental impact without compromising the quality of the final product. Thanks to rigorous control and continuous technical assistance, we are able to assist each customer in choosing the solution best suited to their needs. Origin: Bulgaria Category: Recycled polymers - HDPE - granules - post-consumer If you are a subscriber to rMIX, contact the company. If you are not, subscribe by choosing the contract you prefer
SEE MORE
