Code: 10144. We produce a biocompound consisting of a granulated polypropylene support with the addition of bamboo fibre.
The PP granule with bamboo fiber is 100% recyclable. because, if collected separately, they can be used to produce the same products.
In the PP granule with bamboo fiber the molding temperatures can vary from 160°C to 190°C. Higher temperatures tend to cause deterioration of the fiber contained in the material.
The PP granule with bamboo fiber is sensitive to air humidity and tends to absorb (or disperse) water vapor if exposed to humidity (or dry environments) for long periods.
Before use, drying at 60-70°C for 5-6 hours is recommended.
Technical characteristics of PP granules with bamboo fibre:
- Composition: PP 80% + Bamboo fiber 20%
- Density: 1.098 gr./cm3
- Tensile modulus 1 mm/min: MPa 815
- Tensile strength at break 5mm/min: MPa 22
- Tensile elongation at break 5mm/min: % 8
- Flexural modulus 2mm/min: MPa 2000
- Bending stress at 3.5% strain: MPa 44
- Impact resistance Izod serrated 23°C; 50%: KJ/m 2 5
- Izod impact resistance without notch 23°C; 50%: KJ/m2 13
If you require further technical or commercial information you can contact our sales office.
Origin: Italy
