Company offers

rMIX: Production of Ashlar Geomembrane for Green Roofs

rMIX Ads: Offers/Requests | Plastic Products

Code: 10543. We produce an HDPE geomembrane with 2 cm bosses. suitable for the creation of green roofs. The ashlar geomembrane made of high density polyethylene (HDPE), with a weight of 800 - 1200 g/m², is designed for use on green roofs and for the mechanical and hydraulic protection of tunnels or other underground structures subject to high water flow. ADVANTAGES OF THE GEOMEMBRANE FOR GREEN ROOFS - High resistance to compression and puncture, thanks to the truncated cone shape of the buckets - Uniform load distribution achieved through a high bucket density (400 pieces/m²) - Increasing the air space between the extrusions improves thermal insulation - When installed horizontally, it limits the capillary rise of water, conveying it and discharging it towards the drainage systems (collector). TECHNICAL DATA OF THE GEOMEMBRANE FOR GREEN ROOFS Weight: 800 g/m2 and 1000 g/m2. Material thickness: 0.8mm and 1.0mm. Compressive strength: 160 kN/m2 and 200 kN/m2. Height of the reliefs: 20 mm. Number of reliefs: 400 per square meter. Air space between the bosses: 14 l/m2. Draining capacity: 8 l/s/m, 480 l/min/m, 28,800 l/h/m. Width: 2.0 m and 4.0 m. Temperature resistance: -40 to +80°C. Origin: Poland Category: Plastic products - geomembrane - ashlar membrane - green roofs If you are subscribed to rMIX contact the company, if you are not, subscribe by choosing the contract you prefer .

rMIX: Production of ashlar protection membrane with 1 cm reliefs

rMIX Ads: Offers/Requests | Plastic Products

Code: 10542. Production of embossed membrane in HDPE rolls with embosses 1 cm high. suitable in case of high ground pressure. The high-density polyethylene (HDPE) ashlar membrane offers optimal humidity and ventilation control in the covered surfaces of foundation walls, guaranteed by a density of extrusions exceeding 3,300 pieces/m². This makes it particularly effective in locations subject to high soil pressure, such as deep foundations or access roads above underground garages. PRODUCT ADVANTAGES - High resistance to compression and perforation - Superior ventilation capacity - Facilitates the transpiration of walls and underground structures, improving the effectiveness of thermal insulation - Allows uniform distribution of loads due to ground pressure TECHNICAL DATA Material: HDPE extruded film Roller width: 2.0m. Surface mass: 600 g/m2 Relief height: 10 mm. Number of reliefs: approximately 3360 per square meter Compressive strength: 400 kN/m2 Temperature resistance: -40 to +80°C Air space between the bosses: 7.9 l/m2. Draining capacity (if combined with geotextiles): 4.8 l/s/m | 288 l/min/m | 17,280 l/h/min. Origin: Poland Category: Plastic products - HDPE - embossed membrane - drainage If you are subscribed to rMIX contact the company, if you are not, subscribe by choosing the contract you prefer .

rMIX: Production of Double Ashlar Geomembranes

rMIX Ads: Offers/Requests | Plastic Products

Code: 10541. We produce a roll sheet of double dimpled recycled HDPE ashlar geomembrane for the protection of steep terrain and ditches. The high-density polyethylene (HDPE) geomembrane with double extrusion structure (double clew) offers a greater friction angle with the ground on both sides. This feature makes it particularly useful in places with significant tilt angles, such as ditches and steep areas. Thanks to its high double-sided ventilation capacity, it also acts as an effective air barrier between two concrete walls. ADVANTAGES OF THE DOUBLE BUSH GEOMEMBRANE - Increased friction angle with the ground on both sides, - Superior bilateral ventilation capacity, - Greater resistance to compression and puncture, - Allows uniform distribution of loads due to ground pressure. Origin: Poland Category: Plastic products - geomembranes - HDPE - double ashlar If you are subscribed to rMIX contact the company, if you are not, subscribe by choosing the contract you prefer .

rMIX: Production of ashlar draining membrane in recycled HDPE

rMIX Ads: Offers/Requests | Plastic Products

Code: 10540. We produce the ashlar membrane in rolls composed of recycled HDPE polymer suitable for waterproofing protection. The high-density polyethylene (HDPE) membrane, with a weight of 400 to 1200 g/m2, guarantees optimal protection, insulation and safety for the underground parts of foundations and walls, also preventing the rise of capillary humidity. The advantages of the recycled HDPE dimpled membrane are: - High resistance to compression and tearing, - Ability to eliminate humidity from the foundations by promoting air circulation, - Effective protection of existing insulation, - Contribution to the thermal insulation of foundations, - Guaranteed waterproofness (classified in an advanced sealing class), - Availability of rolls up to 70 meters in length, - Easy installation, supported by a wide range of accessories. If you would like more information about recycled HDPE membrane, please contact our sales department. Origin: Poland Category: Plastic products - embossed membrane - HDPE - construction - waterproofing If you are subscribed to rMIX contact the company, if you are not, subscribe by choosing the contract you prefer .