Code: 680. Self-locking block made of recycled PVC from the recovery of cable sheaths, suitable for the creation of drive-over, colored and electrically insulated outdoor flooring.

With this recycled self-locking block, it is possible to create eco-friendly urban areas, suitable for vehicular traffic, even heavy, as the product has a great resistance to crushing, to the torsion impressed from the wheels of vehicles when they maneuver, stable as they have an interlocking shape, not subject to breakage due to sudden changes in temperature, which can be colored with acrylic paints for plastic materials.

The advantages of the self-locking recycled PVC block:

• Lower transport costs as it weighs less than a concrete block per m2
• Easy to pose as it has an interlocking shape
• Greater dynamic range compared to a self-locking concrete and longer life
• Ecological as it is made 100% with waste from cable recycling
• Creates an electrically insulated surface as PVC is an insulating material
• Resistant to oils and acids
• It washes and degreases easily with jets of water and detergent
• Non-slip
• Suitable for animal stalls as it is easily washable and insulating

Use of self-locking recycled PVC block:

• Flooring of industrial workshops
• Parking
• Vehicle transit areas
• Elevated parking
• Inclined ramps for pedestrian movement and for vehicles
• Flat roofs
• Terraces

Certifications of the self-locking block in recycled PVC:

• Resistance to abrasion
• Flexural strength
• Compressive strength with reduced thickness
• Penetration value of the artifact at different times
• Slipperiness with BCRA method
• Dimensional stability
• Remaining footprint
• Apparent thermal conductivity
• Electrical resistance: surface insulation
• Electrical resistance: insulation through the thickness of the material
• Resistance to cigarette burn
• Reaction to fire
• Eluate analysis

Installation of recycled PVC self-locking blocks

The underlying surface must be well rolled and compacted, there must be no depressions or holes. If the bottom is made of gravel or mixed sand material, it is advisable to lay a layer of 300 gr geotextile per sqm. to separate the subfloor with the upper sand state. This will be composed with a fine grain size for a thickness of 5 cm.

If the substrate is uniform and compact, the geotextile layer is avoidable. Once the sand has been laid, the blocks are arranged following the joints and completing the surface to be paved.

In correspondence with the curbs it is possible to cut the excess part of the solid wood with a simple electric hose.

At this point the floor is ready or it can be painted according to your wishes.

Packaging of the self-locking block in recycled PVC:

Sqm. per pallet: 15

Pallet weight: 950 Kg.

Height of the solid wood: 6.2 cm.

Surface: smooth or textured 

Origin: Italy

Category: Recycled plastic products - solid wood - self-locking - PVC - driveways - construction - flooring

If you are a subscriber to rMIX contact the company, if you are not, subscribe by choosing the contract you prefer.