rMIX: PP biopolymer granule with cork fibreCode: 10147. We produce a biocompound consisting of a granulated polypropylene support with cork fiber added. The PP granule with cork is 100% recyclable. because, if collected separately, they can be used to produce the same products. In the PP granule with cork fibre, the molding temperatures can vary from 160°C to 190°C. Higher temperatures tend to cause deterioration of the fiber contained in the material. The PP granule with cork fiber is sensitive to air humidity and tends to absorb (or disperse) water vapor if exposed to humidity (or dry environments) for long periods. Before use, drying at 60-70°C for 5-6 hours is recommended. Technical characteristics of the PP granule with cork fibre: - Composition: PP 85% + ground cork 15% - Density: 0.930 gr./cm3 - Tensile modulus 1 mm/min: MPa 1100 - Tensile strength at break 5mm/min: MPa 20 - Tensile elongation at break 5mm/min: % 8.8 - Flexural modulus 2mm/min: MPa 1300 - Bending stress at 3.5% strain: MPa 35 - Impact resistance Izod serrated 23°C; 50%: KJ/m2 3 - Izod impact resistance without notch 23°C; 50%: KJ/m2 13 If you require further technical or commercial information you can contact our sales office. Origin: Italy Category: Biopolymers - PP - cork fiber - recycling If you are subscribed to rMIX contact the company, if you are not, subscribe by choosing the contract you prefer .
SEE MORE
rMIX: Biopolymer granule with PP and Bamboo FibreCode: 10144. We produce a biocompound consisting of a granulated polypropylene support with the addition of bamboo fibre. The PP granule with bamboo fiber is 100% recyclable. because, if collected separately, they can be used to produce the same products. In the PP granule with bamboo fiber the molding temperatures can vary from 160°C to 190°C. Higher temperatures tend to cause deterioration of the fiber contained in the material. The PP granule with bamboo fiber is sensitive to air humidity and tends to absorb (or disperse) water vapor if exposed to humidity (or dry environments) for long periods. Before use, drying at 60-70°C for 5-6 hours is recommended. Technical characteristics of PP granules with bamboo fibre: - Composition: PP 80% + Bamboo fiber 20% - Density: 1.098 gr./cm3 - Tensile modulus 1 mm/min: MPa 815 - Tensile strength at break 5mm/min: MPa 22 - Tensile elongation at break 5mm/min: % 8 - Flexural modulus 2mm/min: MPa 2000 - Bending stress at 3.5% strain: MPa 44 - Impact resistance Izod serrated 23°C; 50%: KJ/m 2 5 - Izod impact resistance without notch 23°C; 50%: KJ/m2 13 If you require further technical or commercial information you can contact our sales office. Origin: Italy Category: Biopolymers - PP - Bamboo fiber - recycling If you are subscribed to rMIX contact the company, if you are not, subscribe by choosing the contract you prefer .
SEE MORE
rMIX Production of Biopolymers in PP-Based GranulesCode: 10111. We are producers of technical compounds through the use of different families of polymers. In particular, we produce a PP-based biopolymer, composed of starch flour and suitable for injection molding and thermoforming processes. If you would like further information regarding the PP-based biopolymer granules, contact the sales office. Origin: Iran Category: Recycled polymers - PP - biopolymers - granule If you are subscribed to rMIX contact the company, if you are not, subscribe by choosing the contract you prefer .
SEE MORE
rMIX: PP biopolymer granule with wood flour addedCode: 10145. We produce a biocompound consisting of a granulated polypropylene support with the addition of wood flour. The wood flour PP granule is 100% recyclable. because, if collected separately, they can be used to produce the same products. In the PP granule with wood flour the molding temperatures can vary from 160°C to 190°C. Higher temperatures tend to cause deterioration of the wood flour contained in the material. Wood flour PP granule is sensitive to air humidity and tends to absorb (or disperse) water vapor when exposed to humidity (or dry environments) for long periods. Before use, drying at 60-70°C for 5-6 hours is recommended. Technical characteristics of PP granules with wood flour: - Composition: PP 70% + Wood flour 30% - Density: 0.993 gr./cm3 - Tensile modulus 1 mm/min: MPa 2500 - Tensile strength at break 5mm/min: MPa 24 - Tensile elongation at break 5mm/min: % 3 - Flexural modulus 2mm/min: MPa 2000 - Bending stress at 3.5% strain: MPa 41 - Impact resistance Izod serrated 23°C; 50%: KJ/m2 3 - Izod impact resistance without notch 23°C; 50%: KJ/m2 8 If you require further technical or commercial information you can contact our sales office. Origin: Italy Category: Biopolymers - PP - wood flour - recycling If you are subscribed to r MIX contact the company, if you are not, subscribe by choosing the contract you prefer .
SEE MORE
rMIX: Biopolymer granule with PP and rice huskCode: 10146. We produce a biocompound consisting of a granulated polypropylene support with rice husk added. The PP granule with rice husk is 100% recyclable. because, if collected separately, they can be used to produce the same products. In the PP granule with rice husk the molding temperatures can vary from 160°C to 190°C. Higher temperatures tend to cause deterioration of the fiber contained in the material. Rice husk PP granule is sensitive to air humidity and tends to absorb (or disperse) water vapor if exposed to humidity (or dry environments) for long periods. Before use, drying at 60-70°C for 5-6 hours is recommended. Technical characteristics of the PP granule with rice husk: - Composition: PP 65% + rice husk 35% - Density: 0.986 gr./cm3 - Tensile modulus 1 mm/min: MPa 2000 - Tensile strength at break 5mm/min: MPa 20 - Tensile elongation at break 5mm/min: % 2 - Flexural modulus 2mm/min: MPa 2600 - Bending stress at 3.5% strain: MPa 45 - Impact resistance Izod serrated 23°C; 50%: KJ/m2 2 - Izod impact resistance without notch 23°C; 50%: KJ/m2 7 If you require further technical or commercial information you can contact our sales office. Origin: Italy Category: Biopolymers - PP - rice husk - recycling If you are subscribed to rMIX contact the company, if you are not, subscribe by choosing the contract you prefer
SEE MORE
rMIX: PP Granules with Natural Hemp for InjectionCode: 766. Polypropylene granules added with 25% natural hemp suitable for injection molding to replace virgin material.Characteristics of the polypropylene granule added with 25% natural hemp:Density: 0.98 gr./m3MFI: 22 to 230°/2.16 Kg.Brown colorDrying: recommendedRequest more information on PP Granules with Natural Hemp for Injection.Origin: USACategory: Recycled polymers - hemp fiber - granule - PPIf you are subscribed to rMIX contact the company, if you are not, subscribe by choosing the contract you prefer.
SEE MORE
